Paint Protection Film Performance and Specifications

Paint Protection Film Performance

Crystal clear, high gloss, non-yellowing urethane film
Aggressive, weather resistant, ultra transparent, acrylic adhesive
Clings tenaciously, yet removes cleanly, without residue, from fully cured paint surfaces
Extremely flexible, to conform with no wrinkle or creep
Fast, easy installation
Superior anti-corrosion formulation
Highly resistant to UV, oils and chemicals
Feeds and cuts cleanly on computer controlled devices
Virtually invisible, Auto-Shield™ does not alter the aesthetics of the vehicle or its factory finish

Technical Specifications

6 mil (150 micron) Auto-Shield™ Paint Protection
Designed to remove without adhesive transfer to the applied surface and no damage to painted surfaces.

Substrate Thickness:
Adhesive Thickness:
Total Thickness:
Peel Adhesion:
Shear Adhesion:
Elongation:
Tensile Strength:
Temperature Resistance:
Min. Application Temp.:
Release Liner:

Adhesive:

6.0 mils (150μ)
2.0 mils (50μ)
8 mils (200μ)
25.0 oz/in width (16.3 N/2.5 cm)
2.2 psi indefinite (15.2 kPa)
370%
56 lb/in width (253 N/2.5 cm)
212°F (100°C)
40°F (4.4°C)
90 lb (148 GSM) polycoated bleached kraft
Acrylic, aggressive, removable

Installation

Installation of Auto-Shield™ is performed with a slip solution and drying solution, enabling a clear and bubble free conformed fit to your vehicle. Paint Protection Film installation on bonnet

Paint Protection Film installation on bonnet

Here the bonnet piece is 'rocked' into position with an expert touch by an experienced installer. Next, the moisture is thoroughly squeeged out and the edges folded and dried.